It is important to match the size of the fork to the bucket for the best performance. If the machine is equipped with a Q-hitch, then you should measure with the bucket attached to the Q- hitch. We have different sizes of grips ranging from 0.75t - 40t hydraulic and manual to make sure your grip fits your machine and performs as efficiently as possible. All RSL micro and mini grabs forks are constructed from 12mm (1/2 inch) steel.
All RSLs are fully tested and come with an assembly, maintenance and optimum use guide and have a CE declaration of conformity. For use with your normal bucket, the grip has multiple points so that there is a position to grip most objects, the thumb will also fold up when not in use and the support arm stays on the grip and does not need to be stored in a separate location unlike other grips on the market. The RSL THUMB GRAB excels in forestry/ brash work and waste disposal and lifting trunks to be cut with a chainsaw away from the ground and you will avoid sharpening chainsaw chains. The grab will also reduce the cost of labour, where you can get of the digger or use a second person to break up of lift oversized objects, i. E digging out old foundations that do not fit into normal mini bucket, can be performed by one only persons remaining on the excavator with a thumb grab and no break in productivity.
For the small price this grab will be there to help you for a long time and is there when you need it! Adjustable and removal via pin and lynch pin, the grab can be removed in seconds, simply leaving the main foot welded to the machine. The grip is very simple to fit, just. Weld the item onto the end of your dipper arm.
Or if you want to hire or remove the grab completely. I have used one of these on my digger for a long time now and its fantastic, once you have one of these you will wonder how you did without! All our products are heavy duty and made in our facilities and from quality materials. All pins are made from high tensile steel and the clamshell and grabs leading edge is hardened. RSL reserve the right to upgrade its products from time to time.We at RSL are sorry to have to do this. Country / Region of Manufacture. L'item "Pelleteuse pouce grab, grappin, talon prise 1.5 2.2t 660mm fourche, INCLUS VAT" est en vente depuis le dimanche 12 février 2017. Il est dans la catégorie "Équipements professionnels\Bâtiment, construction\Véhicules de chantier\Pelles mécaniques". Le vendeur est "rslengineering" et est localisé à/en Watford. Cet article peut être expédié aux pays suivants: Amérique, Europe, Japon, Australie.